Language

NEW ITEM

[News Release] Buffing Pad Best Suited for Rotary Polishers Release of “CASPEED” from HAYABUSA’s Second Series Casper

PDF for Printing（187KB）

News Release R-1010

Buffing Pad Best Suited for Rotary Polishers
Release of “CASPEED” from HAYABUSA’s Second Series Casper

A Total Solution Proposed by Buffing Pads that Pursue Ease of Use

FE TRADE CO., LTD will start to offer “CASPEED” from HAYABUSA’s Second Series Casper, suited for rotary polishers. This product pursues the best balance of the load on a pad generally applied by rotary polishers. It provides a total solution to improve the efficiency of polishing work, reducing the polishing effort and minimizing the swirl marks.

[News Release] Buffing Pad Best Suited for Rotary Polishers Release of “CASPEED” from HAYABUSA's Second Series Casper 1

■ Background of the Launch

The rotary polishers apply a lot of load on the buffing surface by the rotating power. Therefore, the compatibility with a pad is the most important factor. This product uses “AirFreed Manufacturing Method” wool that was used in the first series MOLT, and the density and length of the pile are determined through balance distribution based on the load generally applied by rotary polishers. We have applied “AirFreed Manufacturing Method” to short-haired wool, which has a unique Japanese ingenuity. As a result of repeated verification, we created a short-haired wool buffing pad that maximizes the performance of the abrasive and achieves an efficient and speedy finish.

■ Characteristics of the Product

  • ・Various characteristics of “AirFreed Manufacturing Method”
  • ・Unprecedentedly fine finish as wool pad
  • ・Excellent diffusion of the compound and high uniformity of polishing
  • ・Enable to polish to the edge of the panel with a unique Japanese ingenuity

■ From the Section in Charge

What kind of buffing is optimized for the rotational motion load of a rotary polisher? To elucidate this quintessence, we have conducted various verifications to add durability and sustainability while reducing the load generated on the buffing surface by the power of a rotaly polisher. Regarding the density of hair and the length of the pile, which are the core of this product, we were able to calculate the best balance distribution after a trial and error process. We believe that the technology and experience gained from the MOLT series helped us to create CASPEED.

■ Product Summary

Diameter Fiber Length
（W）		 Thickness Hole Diameter Velcro
Diameter		 Material sourced from /
Product made in
80φ – 180φ 9mm (6+W)T・(10+W)T・(15+W)T 10φ – 50φ 75φ – 160φ Australia / Japan
Diameter 80φ – 180φ
Fiber Length
（W）		 9mm
Thickness (6+W)T・(10+W)T・(15+W)T
Hole Diameter 10φ – 50φ
Velcro
Diameter		 75φ – 160φ
Material sourced from /
Product made in		 Australia / Japan
*As of January, 2021
Contact Details
Inquiry form
FE TRADE CO., LTD PHONE: +81-466-50-2486
（9:00am – 4:00pm / Except for weekends, national holidays, year-end and New Year holidays）

*HAYABUSA is FE TRADE CO., LTD’s registered trademark.